American-sanders American 8 Drum Sanders Manuel d'utilisateur Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 30
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
Page 4 Clarke
®
American Sanders American 8 Floor Sander Operator's Manual
DANGER: Electrocution could occur if the machine is used on a power circuit that repeatedly trips or is undersized. Have a
licensed electrician check the fuse, circuit breaker or power supply.
DANGER: Electrocution could occur if maintenance and repairs are performed on a unit that is not properly disconnected from
the power source. Disconnect the power supply before attempting any maintenance or service.
DANGER: Electrocution could occur if machine is used on ungrounded electrical circuit. Never remove or disable the grounding
supply conductor on the electrical cord. Consult an electrician if the grounding conductor is missing or if you suspect
your circuit is not grounded properly.
DANGER: Use of this machine with a damaged power cord could result in an electrical shock. Do not use the machine if the
power cord is damaged. Do not use the electrical cord to move the machine.
DANGER: Electrocution or injury could occur if the power cord is run over or damaged by the sander. Keep the cord free from
under the machine to avoid contact with the sandpaper. Always lift the power cord over the machine.
DANGER: Moving parts of this machine can cause serious injury and/or damage. Keep hands, feet and loose clothing away
from all moving parts of the sander.
DANGER: Operating a sander without all guards, doors or covers in place can cause an injury or damage. Always check to make
sure that all of the guards, doors and covers are secure and in place.
DANGER: Injury to the operator or bystanders could occur if the power supply remains connected when servicing the equipment,
changing abrasive, or empting the dust bag.
WARNING: Failure to read and observe all safety statements found on your machine or in this Owner’s Manual can result in seri-
ous injury or damage. Read and observe all safety statements. Make sure that all labels, decals, warnings, cautions,
and instructions are fastened to the machine. Get new labels from your authorized Clarke American Sanders distribu-
tor.
WARNING: Sanding dust can be airborne and can be breathed in while operating a sander. Always wear a dust mask while oper-
ating sanding equipment.
WARNING: Injury to the eyes and/or body can occur if protective clothing and/or equipment is not worn while sanding. Always
wear safety goggles, protective clothing, and a dust mask while performing any sanding operation.
WARNING: Bodily injury could occur if power is applied to the machine with the power switch already in the “ON” position. Always
check to assure that the power switch is in the “OFF” position before applying power to the power cable.
CAUTION: Maintenance and repairs performed by unauthorized personnel could result in damage or injury. Maintenance and
repairs performed by unauthorized personnel will void your warranty. Servicing of this unit must always be referred to
an authorized Clarke American Sanders distributor.
CAUTION: Use of this machine to move other objects or to climb on could result in injury or damage. Do not use this machine as
a step or furniture. Do not ride on this machine.
CAUTION: Damage could occur to the machine if not properly kept in a dry building for storage. Store the machine in a dry build-
ing.
CAUTION: The machine is heavy. When transporting the machine, remove the motor. Get help to lift the machine and motor.
CAUTION: Serious damage to the oor can occur if the machine is left running in one spot while the sanding drum is in contact
with the oor. To avoid damage to the oor, feather cut in at a normal sanding rate. Do not dwell while lowering or
raising the contact wheel. Always sand at a constant rate.
Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 29 30

Commentaires sur ces manuels

Pas de commentaire